Schedule Your Service

From hauling a dish washer into your home to attaching the water connections, mounting a dishwasher can take up to five hours. If you do not have the right devices, it might take even much longer. To make your life easier as well as to prevent mounting a dishwashing machine improperly, we advise employing a specialist plumber. A plumber will have the right devices available and also can install your brand-new dishwasher in under 2 hours. Keep checking out to discover why you must work with a plumber if you're not fairly convinced yet.

 

Not Installing Your Dish Washer Appropriately Can Cause a Hill of Troubles

Not only can mounting a dishwasher appropriately void your warranty, but it can additionally develop a mess. If you incorrectly mount your dishwasher to the rubbish disposal, you might discover pungent smells or have residue on your recipes.

 

An Improper Setup Can Void the Dish washer's Guarantee

Prior to installing a dishwashing machine on your own, you ought to check out the guarantee carefully. Unless you are useful as well as have experience mounting dish washers, you need to work with a plumber so you don't risk your warranty.

 

Setting Up a Dishwasher Calls For a Variety of Tools

If you do not have a variety of devices on hand, you may need to make a journey to Lowe's or Residence Depot. To install a dishwashing machine, you require the following tools: pliers, an adjustable wrench, a set of screwdrivers, a tube cutter, and opening saws.

 

A Plumber Can Inspect the Supply Lines

A supply line, particularly a dish washer connector, connects the dishwashing machine to a water resource. If you purchase a brand-new supply line, a plumber can make sure that the line is compatible with both your dish washer and also water source. A professional plumber can evaluate it to ensure that it's in excellent problem and does not have any kind of leaks if you make a decision to use an existing supply line.

 

A Plumber Can End Up the Job Affordably and also Promptly

You do not wish to get stuck washing your dishes by hand. A plumber can install your dishwasher in one to two hours. The average plumber won't charge even more than a couple of hundred bucks to install your dishwasher. Why risk your warranty and also possibly have to buy a new dishwashing machine? Take the risk-free and also simple course by employing a plumber.
From transporting a dishwashing machine into your residence to attaching the water connections, mounting a dish washer can take up to five hrs. To make your life simpler as well as to stay clear of setting up a dishwasher improperly, we suggest hiring a specialist plumber. A plumber will have the right tools on hand and also can mount your brand-new dish washer in under 2 hours. Unless you are convenient as well as have experience installing dish washers, you must hire a plumber so you don't risk your warranty.
A supply line, particularly a dishwasher port, attaches the dish washer to a water resource.

 

How To Install A Dishwasher

 

Installing A Dishwasher Yourself

 

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

 

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

 

Steps Involved In Dishwasher Installation

 

Step One: Gather the Necessary Supplies

 

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

 

• A screwdriver


• • A hose clamp


• • Duct tape (optional)


• • A brass fitting


• • Teflon tape


• • A pair of pliers


• • An adjustable wrench


• • A drill


• • Braided steel water line


• • A pair of rubber hand gloves (optional)


• • Wire nuts

 

Step Two: Take Safety Measures

 

First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

 

Step Three: Remove the Old Dishwasher

 

This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

 

Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

 

Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

 

With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

 

Skip this step if you are having a dishwasher installed for the first time in your kitchen.

 

Step Four: Install the New Dishwasher

 

Connect the Water Supply

 

Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

 

Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

 

Attach the Drain Line

 

Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

 

Slide the Dishwasher into Place

 

Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

 

Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

https://www.movementplumbing.com/blog/how-to-install-a-dishwasher

View